Deals Chrome Plated Kit Fits FX 1977/1983 4 speed models with 35mm Showa Fork with Dual Disc Brakes (Imported)-by-V-FACTOR

Special offer Chrome Plated Kit Fits FX 1977/1983 4 speed models with 35mm Showa Fork with Dual Disc Brakes (Imported)-by-V-FACTOR

downmarket Chrome Plated Kit Fits FX 1977/1983 4 speed models with 35mm Showa Fork with Dual Disc Brakes (Imported)-by-V-FACTOR and now avaliable for buy online The Chrome Plated Kit Fits FX 1977/1983 4 speed models with 35mm Showa Fork with Dual Disc Brakes (Imported)-by-V-FACTOR had a good review from previous buyer so its recomended to you Contains all hardware necessary for converting to Mid-Glide front end including: upper bracket, handlebar bushing kit, headlight bracket which is extra thick to prevent cracking and has cut out for headlight, lower bracket with fork stops and neck assembly, dust shields, aluminum fender spacers, spacer bolts and washers for fender, axle, and all screws, bolts, washers, and nuts required..This kit will change width of front end to 8 5/8 inch , which is 2 inch wider than stock..For stock applications, use the original stem nut..For custom applications use our 36615 stem nut with washer found in the front end section..Fork Bracket is hot forged steel made to exceed specifications of original equipment...

Chrome Plated Kit Fits FX 1977/1983 4 speed models with 35mm Showa Fork with Dual Disc Brakes (Imported)-by-V-FACTOR

Chrome Plated Kit Fits FX 1977/1983 4 speed models with 35mm Showa Fork with Dual Disc Brakes (Imported)-by-V-FACTOR Specs

Contains all hardware necessary for converting to Mid-Glide front end including: upper bracket, handlebar bushing kit, headlight bracket which is extra thick to prevent cracking and has cut out for headlight, lower bracket with fork stops and neck assembly, dust shields, aluminum fender spacers, spacer bolts and washers for fender, axle, and all screws, bolts, washers, and nuts required.

This kit will change width of front end to 8 5/8 inch , which is 2 inch wider than stock.

For stock applications, use the original stem nut.

For custom applications use our 36615 stem nut with washer found in the front end section.

Fork Bracket is hot forged steel made to exceed specifications of original equipment.